LINVOL WINONE Freight & Car Lift
WINONE Freight & Car Lift
WINONE WIN1000The LINVOL WINONE Freight & Car Lift is available with a machine room (LTHX WIN1000) or machine-room-less (LTHW WIN1000), with loads from 1600–5500kg, a 3–6mm high-strength anti-slip wear-resistant steel car floor, and compliance with EN81-1.
Freight & Car Lifts · freight
The WINONE freight & car lift is LINVOL's heavy-load series for industrial, logistics, and parking settings. Every unit complies with EN81-1 and national elevator safety codes, and drawing on the manufacturing capability of Midea Building Technologies, it brings large-tonnage stability and durability to the front lines of production and freight.
Detailed Description
Detailed description coming soon.
✨Key Features
- •Loads of 1600–5500kg, with large-tonnage customization
- •Choice of machine-room or machine-room-less structure
- •3–6mm high-strength anti-slip wear-resistant car floor
- •EN81-1 compliant, single/through-door options
🏠Applications
Why Choose This Series?
Midea brand
LINVOL — the official elevator of the Midea Group (a Fortune Global 500 company), with the backing of a major manufacturer and quality you can trust.
Large-tonnage heavy loads
Loads of 1600 – 5500kg handle factory logistics and whole-vehicle lifting alike.
Durable car
A 3 – 6mm high-strength anti-slip steel floor and reinforced car bottom are built to last.
Flexible configuration
Machine-room/machine-room-less and single/through-door configurations suit varied flow lines.
Digitally empowered
Digital technology and AI run through the entire elevator lifecycle, with remote monitoring and early anomaly warnings for smarter, more reassuring operation.
Technical Specifications· Source: LINVOL ↗
| Type | Freight elevator / car lift (WINONE series) |
| Rated load | 1600 / 2000 / 3000 / 5000 / 5500kg, and more |
| Running speed | 0.5 – 1.0m/s (by tonnage and travel) |
| Structure | LTHX WIN1000 with machine room / LTHW WIN1000 machine-room-less |
| Car floor | 3–6mm high-strength steel plate, anti-slip and wear-resistant (stainless steel optional) |
| Door type | Single/through door, with S2 two-panel / C4 four-panel center-opening and more |
🏭Manufacturing Process
- ▸LINVOL — the official elevator brand of the Midea Group (a Fortune Global 500 company), operating under Midea Building Technologies
- ▸Manufacturer: Lingwang Elevator Co., Ltd. — decades of expertise in complete-unit elevator manufacturing, with strengths further elevated after joining the Midea ecosystem
- ▸Backed by Midea's digital elevator R&D center and Foshan industrial-park factory, with key components developed and produced in-house and integrated control of the traction machine and control system
- ▸In-house permanent-magnet synchronous gearless traction machines — highly efficient, energy-saving, smooth-running, and low-noise, forming the core of an efficient and comfortable experience
- ▸Digital technology and AI run through every stage: design, production, customization, R&D, operation, and maintenance, with each unit individually commissioned and safety-tested before leaving the factory
🏆Quality Certifications
- ✓Special Equipment Manufacturing License — elevators are nationally regulated special equipment, and LINVOL produces under license, with complete units and components all within the regulatory catalog
- ✓Compliant with elevator supervisory and periodic inspection rules (TSG 7001) — manufacturing, installation, modernization, and maintenance are all covered by the inspection regime
- ✓Compliant with the national standard for elevator manufacturing and installation safety (GB 7588) — covering the traction machine, overspeed governor, safety gear, buffers, and other safety components
- ✓Home elevators built to the new standard GB/T 21739-2025 — villa and residential models designed and manufactured to the current national standard
- ✓Quality management system established to Midea Group standards — design, production, testing, and delivery are controlled and fully traceable end to end
🔧Installation Guide
- 1.Survey the hoistway before installation: pit depth, top-floor headroom, travel height, clear hoistway dimensions, and number of floors, and verify the load and speed selection
- 2.A licensed installation team mobilizes on-site to assemble the guide rails, traction machine, car, and counterweight per drawings, following special-equipment installation codes throughout
- 3.Properly connect the power supply, control wiring, door-interlock circuits, and power-failure emergency rescue device to ensure safe power supply and grounding
- 4.Commission the overspeed governor, safety gear, buffers, and other safety components, and verify leveling accuracy, running speed, and door open/close timing
- 5.Complete no-load and full-load test runs before commissioning, and hand over for passenger use only after passing inspection-authority acceptance
🧽Care & Cleaning
The steward-plus-expert model carries out planned inspections, checking the steel ropes and guide rails, permanent-magnet traction machine, brake, door system, and control cabinet to ensure reliable operation.
Digital technology and AI support remote monitoring of operating status, providing early warnings for anomalies in the door operator, leveling, vibration, and more, resolving faults before they occur.
Coordinate periodic inspections per TSG rules, replacing safety components as they reach end of life; in the event of an operating anomaly, the elevator is stopped immediately for diagnosis and never run while compromised.
Keep the car, door guide shoes, light curtain, and call boxes clean, and regularly lubricate the guide rails to extend component life and ride comfort.
📦Packaging & Shipping
| Supply format | Complete elevator system (car, traction system, control cabinet, door operator, guide rails, and more) shipped as an engineered package |
| Customization | Car finishes, door-opening configuration, control panel, and signaling system tailored to the project's hoistway and floors |
| Transit protection | Precision components reinforced in wooden crates or frames, car walls and door panels film-wrapped against scratches, and pallets shrink-wrapped for shipment |
| Service | A steward-plus-expert model — lifetime warranty plus maintenance, service hotline 400-700-7722 |
| Samples | Car finish color swatches and configuration proposals available, with style and features confirmed before the engineering order is placed |
Reference Projects Using This Series
Frequently Asked Questions
▸Is LINVOL a Midea brand?
▸What drive does the elevator use? Is it energy-efficient?
▸How is elevator safety ensured?
▸Are installation and maintenance available in Vietnam?
▸What is the warranty policy?
Need a DDP quote for LINVOL WINONE Freight & Car Lift to Vietnam?
The Huayue Guangzhou sourcing team will contact you to verify stock and price a full 20ft / 40ft HQ container or LCL, and send a complete quote within 24 hours (incl. duties + shipping + installation if needed).