Polymer waterproofing membranes (TPO/HDPE)ยท membrane-poly
TPO-FS2 โ Polymer (TPO) Composite Waterproofing Membrane
้ซๅๅญ๏ผTPO๏ผๅคๅ้ฒๆฐดๅทๆ
SKU code:
โ In stock at Foshan warehouse๐ฆ DDP to Vietnam in 7โ10 daysTPO-FS2TPO-FS2 Polymer (TPO) Composite Waterproofing Membrane is made of dedicated thermoplastic polyolefin waterproofing-membrane resin and additives, using a dedicated adhesive to bond directly onto metal sheet, concre
๐ญManufacturer
Yuhong
๐งฑIndustry
Building Materials
๐ก๏ธWarranty25 yr
โ
Factory Audit2 on-site/yr
๐Export60+ countries
Series Story
Polymer waterproofing membranes (TPO/HDPE) ยท membrane-poly
Yuhong polymer waterproofing membranes (TPO, HDPE/PMH, PME) โ high chemical and mechanical durability, watertight heat-welded seams, for roofs, basements, reservoirs and pre-applied items.
Technical Heritage
The polymer line is the modern solution for projects demanding high durability and long service life.
Detailed Description
Detailed description coming soon.
๐ Applications
Outstanding performance: outstanding properties such as high tensile strength, large elongation, chemical-corrosion resistance and thermal-aging resistanceCorrosion-resistant: withstands corrosion from acids, alkalis and salts, resists the growth of microorganisms such as algae and moldConvenient installation: uses a dedicated adhesive to bond directly onto metal sheet, concrete and mortar substrates; convenient to install with reliable waterproofing performanceEnergy-saving, environmentally friendly: the formula contains no solvents or harmful additives and releases no harmful substances during production, storage, transport and installation, causing no environmental pollution
Why Choose This Series?
๐
China's No.1 in waterproofing
The leading brand, used on national mega infrastructure projects.
๐ฅ
Watertight heat-welding
Heat-welded seams form a monolithic, watertight bond.
๐ก๏ธ
Chemical-resistant
Withstands the environment and aging well, with a long service life.
Technical Specificationsยท Source: Yuhong โ
| Thickness | 1.2 / 1.5 / 1.8 mm |
| Specifications | width 2.0 m; length 30 m (1.2mm), 25 m (1.5/1.8mm); 60 mยฒ/roll (1.2mm), 50 mยฒ/roll (1.5/1.8mm) |
| Applicable standard | GB 18173.1-2012 resin-based composite sheet Type FS2 |
| Material | dedicated thermoplastic polyolefin (TPO) waterproofing-membrane resin and additives |
| Application range | suitable for fully bonded systems on the substrate |
| Tensile strength (23โ) | โฅ60 N/cm |
| Elongation at break (23โ) | โฅ400% |
| Cold flexibility | -20โ, no cracking |
๐ญManufacturing Process
- โธBeijing Oriental Yuhong ไธๆน้จ่น (SZSE 002271) โ China's largest waterproofing manufacturer, founded 1995
- โธDozens of production sites across China; a national-level R&D and testing lab system
- โธAutomated lines for bitumen/polymer membranes and coatings; batch-by-batch quality control
- โธSupplier to mega infrastructure projects: high-speed rail, airports, metros, reservoirs
๐Quality Certifications
- โChina national standard (GB) for waterproofing membranes and coatings
- โISO 9001 / ISO 14001 / ISO 45001
- โGreen product certification, low VOC content
- โChina Well-Known Trademark
๐งInstallation Guide
- 1.Prepare a clean, dry, even surface free of dust and oil before application
- 2.Torch-on/adhesive membranes: heat-weld or peel the self-adhesive layer per instructions; allow ample overlap
- 3.Coatings: apply in several coats at the correct spread rate, with enough drying time between coats
- 4.Run a water-immersion acceptance test before screeding the protective layer or tiling
๐งฝCare & Cleaning
Storage
Keep in a dry place away from heat and open flame (bitumen membrane). Keep coatings sealed to prevent skinning.
Application
Observe the recommended spread rate and application temperature; do not apply in rain or high humidity.
Acceptance
Check overlaps, corner fillets and pipe collars; run a water test before covering.
๐ฆPackaging & Shipping
| Roll membrane | 1 m wide rolls, 10โ20 m per roll; shrink-wrapped pallets |
| Coating | 20 kg pails (or per manufacturer spec) |
| MOQ | By container; mixed SKUs OK |
| Storage | Cool, dry place out of sunlight; store membranes upright, keep coatings sealed |
Reference Projects Using This Series
๐๏ธBird's Nest National Stadium
๐๏ธHigh-speed rail and metros
๐๏ธAirports, reservoirs, metro tunnels
Frequently Asked Questions
โธDo Yuhong materials carry a GB standard for import?
Yes. We provide the applicable standard (GB) plus test reports; Huayuesc supports import documentation.
โธCan you advise on the right waterproofing system for our application?
Yes. Send your application (roof, basement, bathroom, water tank, etc.) and we will recommend the right membrane/coating.
โธMOQ and lead time?
Calculated by container; delivery schedule quoted per order.
Other SKUs in This Seriesยท Polymer waterproofing membranes (TPO/HDPE)
View Full Catalog โ
PME-EVAPME-EVA โ Plastic Waterproofing Sheet
PMH-3040PMH-3040 โ High-Density Polyethylene Self-Adhesive Film Waterproofing Membrane
PMH-3041PMH-3041 โ Polymer Self-Adhesive Film Waterproofing Membrane (substrate self-adhesive)
PMH-3080PMH-3080 โ Polymer Self-Adhesive Film Waterproofing Membrane (HDPE)
TPO-PTPO-P โ Thermoplastic Polyolefin (TPO) Waterproofing Membrane
TPO-YPMTPO-YPM โ Polymer Self-Adhesive Film (TPO) Pre-Applied Waterproofing Membrane
TPO-ZZTPO-ZZ โ Self-Adhesive Thermoplastic Polyolefin (TPO) Waterproofing Membrane
Fast quote within 24 hours
Need a DDP quote for TPO-FS2 โ Polymer (TPO) Composite Waterproofing Membrane to Vietnam?
The Huayue Guangzhou sourcing team will contact you to verify stock and price a full 20ft / 40ft HQ container or LCL, and send a complete quote within 24 hours (incl. duties + shipping + installation if needed).
๐ Hotline: 028-3999-1234๐ง sourcing@huayuesc.vn๐ Guangzhou + Ho Chi Minh City + Hanoi offices