TPO-P โ Thermoplastic Polyolefin (TPO) Waterproofing Membrane
็ญๅกๆง่็ฏ็๏ผTPO๏ผ้ฒๆฐดๅทๆ
TPO-POriental Yuhong's TPO-P Thermoplastic Polyolefin (TPO) Waterproofing Membrane, to standard GB 27789-2011 reinforced type (Type P), is mainly suited to all types of roof waterproofing such as industrial and residential
Polymer waterproofing membranes (TPO/HDPE) ยท membrane-poly
The polymer line is the modern solution for projects demanding high durability and long service life.
Detailed Description
Detailed description coming soon.
๐ Applications
Why Choose This Series?
China's No.1 in waterproofing
The leading brand, used on national mega infrastructure projects.
Watertight heat-welding
Heat-welded seams form a monolithic, watertight bond.
Chemical-resistant
Withstands the environment and aging well, with a long service life.
Technical Specificationsยท Source: Yuhong โ
| Applicable standard | GB 27789-2011 reinforced type (P) |
| Thickness | 1.2, 1.5, 1.8, 2.0 mm |
| Width | 2.0 m |
| Length | 30, 25, 20, 18 m |
| Application range | Mainly applied to all types of roof waterproofing such as industrial and residential buildings and public works |
๐ญManufacturing Process
- โธBeijing Oriental Yuhong ไธๆน้จ่น (SZSE 002271) โ China's largest waterproofing manufacturer, founded 1995
- โธDozens of production sites across China; a national-level R&D and testing lab system
- โธAutomated lines for bitumen/polymer membranes and coatings; batch-by-batch quality control
- โธSupplier to mega infrastructure projects: high-speed rail, airports, metros, reservoirs
๐Quality Certifications
- โChina national standard (GB) for waterproofing membranes and coatings
- โISO 9001 / ISO 14001 / ISO 45001
- โGreen product certification, low VOC content
- โChina Well-Known Trademark
๐งInstallation Guide
- 1.Prepare a clean, dry, even surface free of dust and oil before application
- 2.Torch-on/adhesive membranes: heat-weld or peel the self-adhesive layer per instructions; allow ample overlap
- 3.Coatings: apply in several coats at the correct spread rate, with enough drying time between coats
- 4.Run a water-immersion acceptance test before screeding the protective layer or tiling
๐งฝCare & Cleaning
Keep in a dry place away from heat and open flame (bitumen membrane). Keep coatings sealed to prevent skinning.
Observe the recommended spread rate and application temperature; do not apply in rain or high humidity.
Check overlaps, corner fillets and pipe collars; run a water test before covering.
๐ฆPackaging & Shipping
| Roll membrane | 1 m wide rolls, 10โ20 m per roll; shrink-wrapped pallets |
| Coating | 20 kg pails (or per manufacturer spec) |
| MOQ | By container; mixed SKUs OK |
| Storage | Cool, dry place out of sunlight; store membranes upright, keep coatings sealed |
Reference Projects Using This Series
Frequently Asked Questions
โธDo Yuhong materials carry a GB standard for import?
โธCan you advise on the right waterproofing system for our application?
โธMOQ and lead time?
Other SKUs in This Seriesยท Polymer waterproofing membranes (TPO/HDPE)
View Full Catalog โ
PME-EVA
PMH-3040
PMH-3041
PMH-3080
TPO-FS2
TPO-YPM
TPO-ZZNeed a DDP quote for TPO-P โ Thermoplastic Polyolefin (TPO) Waterproofing Membrane to Vietnam?
The Huayue Guangzhou sourcing team will contact you to verify stock and price a full 20ft / 40ft HQ container or LCL, and send a complete quote within 24 hours (incl. duties + shipping + installation if needed).